Positioning The Speakers - Philips DFR9000/01 Instructions For Use Manual

Philips cineos digital av receiver system dfr9000 with video upscaling up to 1080i
Hide thumbs Also See for DFR9000/01:
Table of Contents

Advertisement

TV
CENTRE
FRONT
FRONT
LEFT
RIGHT
LISTENING POSITION
SURROUND
SURROUND
LEFT
SURROUND
BACK
Connecting the speakers
SURROUND
LEFT
Connect the left front speaker to the L(eft) terminals (17) and the right front speaker to
the R(ight) terminals (17).
Connect the left Surround speaker to the S(urround) L(eft) terminals (17) and the right
Surround speaker to the S(urround) R(ight) terminals (17).
Connect the centre speaker to the C terminal (17).
If you wish to connect an active subwoofer:
Connect the active subwoofer to the SUB OUT terminal (26).
The Surround back speaker can be connected to the 6.1 S(urround) B(ack)/5.1 SUB
terminals (17).
For a 5.1 (or less) speaker configuration / if you wish to connect a passive subwoofer:
Connect the passive subwoofer to the 6.1 S(urround) B(ack)/5.1 SUB terminals (17).

4.9 Positioning the speakers

Speaker positioning in a multichannel home theatre system can noticeably improve the quality
of sound reproduced. Speakers are usually designed to perform best at a particular position.
This could be on the floor, on stands, near the wall or away from walls.
Below you will find a few tips on getting the best sound from your speakers, but you should
also follow the instructions on positioning in the Instructions for use, supplied with your
speakers to get the most out of them.
General hints for positioning
If possible, use the same model or brand of speakers for all front speakers.This creates a
seamless front soundstage and eliminates the possibility of distracting sonic disturbances
that occur when a sound moves across mismatched front-channel speakers.
Avoid positioning the speakers in a corner, as this will boost the bass tones too much.
Placing the speakers behind curtains, furniture etc. will reduce the treble response, thus
reducing the stereo effect considerably.The listener should still be able to 'see' the
speakers.
Each room has different acoustic characteristics and the positioning possibilities are often
SUB
limited.You can find the best position for your speakers by experimenting. In general, the
WOOFER
speakers should be arranged as symmetrically as possible in the room.
Positioning the front speakers
Place the front left and right speakers at equal distances from the TV.
The front speakers should be arranged so that, viewed from the listener's position, the
speaker connected to the 'L' terminals of the receiver is on the left and the speaker
RIGHT
connected to the 'R' terminals is on the right of the listener.This can be checked with the
balance control in the system menu.
The best stereo effect is obtained when the two front speakers and the listener form an
equilateral triangle.
TV
CENTRE
ACTIVE
WOOFER
FRONT
FRONT
LEFT
RIGHT
SURROUND
RIGHT
SURROUND
BACK
ENGLISH
SUB
21
CD IN
CD-R IN
AUX IN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dfr9000 - annexe 1Cineos dfr9000

Table of Contents