Table of Contents
Advertisement
Important notes for users in the U.K.
Mains plug
This apparatus is fitted with an approved 13 Amp plug.
To change a fuse in this type of plug proceed as follows:
1 Remove fuse cover and fuse.
2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or
BSI approved type.
3 Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place. If the mains
plug contains a fuse, this should have a value of 5 Amp.
If a plug without a fuse is used, the fuse at the distribution board
should not be greater than 5 Amp.
Note: The severed plug must be disposed of to avoid a
possible shock hazard if it is inserted into a 13 Amp socket
elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following
code: blue = neutral (N), brown = live (L).
As these colours may not correspond with the colour markings
identifying the terminals in your plug, proceed as follows:
• Connect the blue wire to the terminal marked N or coloured
black.
• Connect the brown wire to the terminal marked L or
coloured red.
• Do not connect either wire to the earth terminal in the plug,
marked E (or e ) or coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord grip
is clamped over the sheath of the lead - not simply over the
two wires.
Copyright in the U.K.
Recording and playback of material may require consent.
See Copyright Act 1956 and The Performer's Protection Acts
1958 to 1972.
This product is equipped with copy protection technology required by
many motion picture companies that produce high definition movies.
Consumers should note that not all high definition television sets are fully
compatible with the applied technology and therefore may cause artifacts
to be displayed in the picture. In case of 525 or 625 Progressive Scan
picture problems, it is recommanded that the user switches the
connection to the 'standard definition' output.
Copyright protection
This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorised by
Macrovision, and is intended for home and other limited viewing uses
only unless otherwise authorised by Macrovision. Reverse engineering or
disassembly is prohibited.
Recording is permissible insofar as copyright or other rights of
third parties are not infringed upon.
Hide quick links:
Advertisement
Table of Contents
