Maintenance And Cleaning; Storage - Parkside PKLL 8 A2 Instructions Manual

4. If want to put back the cross line laser on the tripod again, pull
the lever
1 1a
back firmly on the tripod flat head
19
to bring back to original position and to firmly hold the quick
1 1a
shoe (see fig. A).
5. Check the tight fitting of the quick shoe
head .
18

Maintenance and cleaning

The product requires no maintenance.
ATTENTION! Never submerge the product in water or other liquids.
Do not allow water to enter into the product during cleaning.
Keep the product clean to ensure good, secure work.
Use a dry cloth to clean the outside.
Clean the laser beam opening
heavy contamination, remove the dirt with a slightly damp Q-tip.
Do not exert any strong pressure!
opened by a professional.
Have the measuring tool repaired by qualified professionals and
only with original replacement parts. This ensures that the safety of
the measuring tool is maintained.

Storage

If you will not be using the product for a prolonged period of time,
remove the batteries and store it in a clean, dry place that is not
exposed to direct sunlight.
on the tripod flat head
For repair purposes the product may only be
and place the quick shoe
18
. Then, release the lever
18
within the tripod flat
19
with a soft air jet. In cases of
7
GB/CY 17