Disable The Screen Saver; Use Your Phone As A Digital Picture Frame; Picture Frame Icons - Polycom VVX Series User Manual

Disable the Screen Saver

You can stop a screen saver at any time by touching the screen. After your phone is idle for the specified
period of time, the screen saver starts again.
You can disable a screen saver—prevent it from starting, even if your phone has been idle for the
specified period of time—by doing the following:
• Disabling the Screen Saver setting. When you disable the setting, the screen saver does not
display, even though the USB flash drive is still attached.
• Removing the USB flash drive. The screen saver does not display until you attach the USB flash
drive again and your phone is idle for the period of time you specified.
Procedure
1. Navigate to Settings > Basic > Preferences.
2. Select Screen Saver > Screen Saver then select Disabled.
3. Select Save.

Use Your Phone as a Digital Picture Frame

On VVX 250, 350, and 450 phones, you can use the Picture Frame feature to view pictures stored on
your USB flash drive at any time without setting up a screen saver.You can display your pictures as
thumbnails, as a slide show, or a single picture.
Before you can display your pictures, confirm that your pictures are on the USB flash drive and that the
USB flash drive is attached to your phone.
Note: If your phone does not detect the USB flash drive when you attach it to your phone, the USB port
on your phone may be disabled. Contact your system administrator.
Procedure
1. Select Settings > Features > Removable Storage Media > Picture Frame.
Your pictures display one-by-one, like a slide show, and navigation icons display beneath your
pictures, as shown next.

Picture Frame Icons

Use the icons in the following table to perform actions in the Picture Frame.
Polycom, Inc.
® ®
Polycom VVX Business IP Phones Settings
41