Page 2
Use eye and ear protection. Always wear ANSI approved impact safety goggles. Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. Page 2 SKU 03135...
Page 3
When unpacking, check to make sure the parts listed on page 5 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. Page 3 SKU 03135...
Page 4
1. Periodically apply a light coat of machine oil to all of the moving parts. 2. To clean, thoroughly wipe with a mild solvent to remove excess oil and metal shavings. Dry with a clean cloth and then re-apply machine oil. Page 4 SKU 03135...
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. Page 5 SKU 03135...
Page 6
Brought To You By Augusta Flint Assembly Drawing Note: Parts 14, 15, 16, and 17 are internal and not shown on the assembly drawing. Page 6 SKU 03135...