Table of Contents
Advertisement
AC211A-R2 & AC216A-R2
1-8. AC216A-R2 PLUS FRONT PANEL DESCRIPTION
LCD CONTROL
ENTER:
FREEZE:
INPUT SELECTION: Selection of the 3 input sources.
C.VIDEO 1:
C.VIDEO 2:
RGB/YUV:
S.VIDEO:
COMPUTER:
NOTE: A long push (2 seconds) on the selected input button allows to active the BLACK function. A black screen
is displayed onto the output. A short push on an INPUT SELECTION button allows to inactive this
function.
1-9. AC216A-R2 PLUS REAR PANEL DESCRIPTION
ON / OFF:
POWER:
AUDIO IN & OUT
1, 2, 3, 4 & 5:
OUT:
INPUT SOURCES
1-C.V:
2-C.V:
3-RGB/YUV:
4-S.VIDEO:
5-COMPUTER:
RS-232:
DISPLAY OUTPUTS
ANALOG:
DVI-I:
Validates a selected item.
A long push on this button allows to activate the STANDBY mode. A short push on a front
panel push button allows to wake up the device.
Allows to scroll thru the different menus (in Control mode).
A short push allows to freeze the displayed output.
Composite source #1 selection (Input #1).
Composite source #2 selection (Input #2).
RGBS & YUV source selection (Input #3).
S.VIDEO source selection (Input #4).
Computer source selection (Input #5).
AC power switch (O = OFF, I = ON).
Standard IEC connector (100-250 VAC, 1A, 50-60Hz automatic).
Audio stereo inputs on MCO connectors.
L: Left, R = Right.
Audio stereo output on a MCO connector.
Composite Video input #1 on a BNC female connector.
Composite Video input #2 on a BNC female connector.
RGBS & YUV (Y, Cr, Cb) video input on 4xBNC female connectors.
S.VIDEO (Y/C) input on 4-pin mini DIN female connector.
Computer input on a HD15 female connector.
RS-232 communication port on a DB9 female connector.
Analog computer output (RGBHV, RGBS or RGsB) on a HD15 female connector.
Digital & analog computer output on a DVI-I female connector.
Chapter 1 : INTRODUCTION (continued)
PAGE 9
Advertisement
Table of Contents
