Table of Contents
Advertisement
AC211A-R2 & AC216A-R2
Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION
4-1. INTRODUCTION
The front panel display menu presents 2 modes: the STATUS MODE and the CONTROL MODE.
• The STATUS MODE indicates the input and output status of the device.
• The CONTROL MODE allows selecting and adjusting the parameters of the device.
4-2. CONTROL BUTTONS
The front panel display is controlled by 1 button and 1 knob:
knob:
ENTER button:
4-3. STATUS MODE
When switching ON, the front panel display shows the product's name and firmware versions as follows:
DEVICE MODEL
DEVICE VERSION
INPUT NUMBER / INPUT STANDARD
OUTPUT RATE MODE / OUTPUT FRAME RATE.
OUTPUT RESOLUTION.
• In the CONTROL MODE, turn this knob to scroll thru the different menus.
• From the STATUS MODE, press this button to enter in the CONTROL MODE.
• From the CONTROL MODE, press this button to confirm a selected item.
AC216A-R2
Version _._
In :
#1 / NTSC
Out : intern / 60 Hz
In :
#1 / NTSC
Out :
1280x1024
DEVICE STATUS
INPUT STATUS
OUTPUT STATUS
PAGE 13
Advertisement
Table of Contents
