Black Box AC211A-R2 User Manual page 11

AC211A-R2 & AC216A-R2
2-2. STARTING THE AC216A-R2
• Connections:
Turn OFF all of your equipment before connecting.
Connect your video sources to the inputs 1, 2, 3 & 4 of the device.
Connect your computer source to the input 5 of the device.
Connect your display device (projector, plasma screen...) to the DISPLAY OUTPUTS (HD15 or DVI-I female
connectors) of the device.
Connect the AC power supply cord to the device and to an AC power outlet.
Turn ON the device (rear panel switch). Then turn ON all your input sources and then your display device.
• AC216A-R2 connection diagram:
5
6
• DVI-I pin assignment:
The DVI-I female connector of the device can be used with digital signals as well as analog signals. The table hereafter
explain the pin assignment of these connectors.
Pin Function
1 TMDS Data 2-
2 TMDS Data 2+
TMDS Data 2 Shield
3
4 Not used.
5 Not used.
6 DDC Clock
DDC Data
7
Analog Vertical Sync.
8
C1 Analog Red video
C2 Analog Green Video
C3 Analog Bleu Video
Analog Horizontal Sync
C4
Analog Common Ground Return
C5
DDC = Display Data Channel.
TMDS = Transition Minimized Differential Signal.
2
Pin Function
9 TMDS Data 1-
10 TMDS Data 1+
TMDS Data 1 Shield
11
12 Not used.
13 Not used.
14 + 5V (Power)
Ground for (+5V)
15
Hot plug detect.
16
Chapter 2 : STARTING (continued)
4
3
Pin Function
17 TMDS Data 0-
18 TMDS Data 0+
TMDS Data 0 Shield
19
20 Not used.
21 Not used.
22 TMDS Clock Shield
TMDS Clock+
23
TMDS Clock-
24
8
1
9
17
24
C1 C2
C5
16
C3 C4
PAGE 11