Chapter 3 : Operating Mode - Black Box AC211A-R2 User Manual

Chapter 3 : OPERATING MODE

3-1. SETTINGS
We recommend resetting the device to all of its default values, with the front panel display menu (CONTROL >
default value > yes) before proceeding.
Select the input type connected to the INPUTS with the front panel display menu (INPUT > input type).
For the AC216A-R2 only, select the output type with the front panel display menu (OUTPUT > output type).
Select the output format which corresponds to your display device with the front panel display menu (OUTPUT >
output format).
Select one of the output rate available with the front panel display menu (OUTPUT > output rate).
Select the output sync type with the front panel display menu (OUTPUT > output sync).
3-2. IMAGE ADJUSTMENTS
For each input source connected to the device, make the following adjustments:
Select the source you want to adjust (with the front panel "INPUT SELECTION" buttons).
Select the aspect ratio of your input source with the front panel display menu (IMAGE > aspect ratio in).
Adjust the image in your display device with the position & size functions (IMAGE > pos settings).
If needed, make the others adjustments, available in the IMAGE menu (color, brightness...).
NOTE: To set the image adjustments to the factory settings, use the Preset function (IMAGE > preset > yes).
3-3. AUDIO ADJUSTMENTS
Adjust the master volume (AUDIO > master volume).
For each audio input, adjust the level (AUDIO > audio level) and the balance (AUDIO > audio balance).
PAGE 12
AC211A-R2 & AC216A-R2