Safety Procedures And Precautions; Installation - Alto-Shaam HFM-24 Manual

Hot food module electric
Table of Contents

Advertisement

SAFETY PROCEDURES
AND PRECAUTIONS
This appliance is intended to hold foods for the
purpose of human consumption. No other use for
this appliance is authorized or recommended.
This appliance is intended for use in commercial
establishments where all operators are familiar
with the purpose, limitations, and associated
hazards of this appliance. Operating instructions
and warnings must be read and understood by
all operators and users. We recommend regular
training of your staff to avoid the risk of accident
or damage to the unit. Operators must also receive
regular safety instructions.
Any trouble shooting guides, component views,
and parts lists included in this manual are for
general reference only and are intended for use by
qualified and trained technicians.
This manual should be considered a permanent
part of this appliance. This manual and all supplied
instructions, diagrams, schematics, parts lists,
notices, and labels must remain with the appliance
if the item is sold or moved to another location.
N O T I C E : For equipment delivered for use in
any location regulated by the
following directive:
DO NOT dispose of electrical or
electronic equipment with other
municipal waste.
MN-35698 (R
. 4) 09/15 • HFM SERIES MERCHANDISER • 2
ev
Knowledge of proper procedures is essential to the
safe operation of electrically and/or gas energized
equipment. The following hazard signal words and
symbols may be used throughout this manual.
D A N G E R
Used to indicate the presence of
a hazard that WILL cause severe
personal injury, death, or substantial
property damage if the warning
included with this symbol is ignored.
W A R N I N G
Used to indicate the presence of
a hazard that CAN cause personal
injury, possible death, or major
property damage if the warning
included with this symbol is ignored.
C A U T I O N
Used to indicate the presence of a
hazard that can or will cause minor or
moderate personal injury or property
damage if the warning included with
this symbol is ignored.
C A U T I O N
Used to indicate the presence of a hazard that
can or will cause minor personal injury, property
damage, or a potential unsafe practice if the
warning included with this symbol is ignored.
N O T I C E : Used to notify personnel of
installation, operation, or
maintenance information that is
important but not hazard related.
Used to indicate that referral to
operating instructions is a mandatory
action. If not followed the operator
could suffer personal injury.
Used to indicate that referral to
operating instructions is recommended
to understand operation of equipment.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hfm-30Hfm-72Hfm-48

Table of Contents