Febo Flame F18-I-008-018C Manual page 14

OPERATING INSTRUCTIONS
4. Power: Push button to turn on or turn off. If ON, the
digital display screen will show the room temperature,
the flame is on. If OFF, all functions except Timer will be
restored at the next power ON.
Note: Unplugging the unit will reset all functions.
5. Flame: Press to activate the flame function. The
FLAME button controls the flame and ember effect.
When the fireplace is first turned on, the default state is
amber flame. When you press Flame button continually,
there are 5 selections you can cycle through, including
Amber, Midnight, Polar, Hearth (Flame OFF, the ember
remains on) and Violet, the digital display screen will
show corresponding letter of flame as A, M, P, H, U.
Note: Press UP or DOWN button on the remote control
to adjust the brightness of flame except Polar mode.
There are 5 levels of the brightness, the digital display
screen will show the corresponding numbers.
Note: Press and hold the FLAME button for 5 seconds
to activate the child lock function. When the CHILD
LOCK is on, all the other features are disabled, and
the digital display screen will show--. Press and hold
the FLAME button again for 5 seconds to unlock the
function.
4
5
14