Do you have a question about the ZHS-32-F and is the answer not in the manual?
Questions and answers
Lemaeka Davis
March 10, 2025
How do you make the blower work
1 comments:
Mr. Anderson
May 14, 2025
The blower on the Febo Flame ZHS-32-F operates automatically when the heater is turned on. When the heater is turned off, the blower continues to run for 60 seconds to cool down the unit. There is no separate control for the blower; it functions as part of the heater operation.
This answer is automatically generated
Wanda
February 23, 2025
How do you turn on the blower?
1 comments:
Mr. Anderson
May 14, 2025
To turn on the blower (heater) for the Febo Flame ZHS-32-F, press the "HEATER" button on the control panel or use the multifunction remote control.
Page 1
ELECTRIC FIREPLACE INSERT USER MANUAL User Manual ITEM NO.: ZHS-32-F PLEASE READ THIS MANUAL CAREFULLY FOR ELECTRIC FIREPLACE INSERT BEFORE INSTALL AND USE. PLEASE DO NOT RETURN ANY PRODUCT TO STORE. FOR ANY MISSING PARTS, HARDWARE OR ASSEMBLY PROBLEMS, PLEASE CONTACT WITH OUR CUSTOMER SERVICE CENTER AT 1-877-355-3326.
18. Do not attempt to burn wood or other materials in this appliance. 19. This appliance, when installed must be electrically grounded in accordance with the current. Canada: CSA C22.1, Canadian Electrical Code U.S.A.: ANSI/NFPA NO. 70, National Electrical Code SAVE THESE INSTRUCTIONS MODEL:ZHS-32-F PAGE 2 OF 10...
Page 3
Using the control panel, located in the upper right-hand corner of the electric insert. Using the multifunction remote control. The main control panel is located at the top right corner on the front (see Figure 2). Figure 2 MODEL:ZHS-32-F PAGE 3 OF 10...
Page 4
✦ This feature can also be controlled with the Remote Control and the APP. Heater (Figure 3.C): ✦ The HEATER button controls the heat ON and OFF feature. ✦ The system will start the default temperature setting at 75°F/24°C. MODEL:ZHS-32-F PAGE 4 OF 10...
Page 5
✦ When the fireplace is first turned on, the default state is level S3. ✦ There are 5 levels of the flame speed, when you press this button continually or press Up or Down button, the digital display screen will show corresponding letter as S1 to S5. MODEL:ZHS-32-F PAGE 5 OF 10...
Page 6
Hearth, Timer or Flame speed, the ice blue circle will be shown and twinkling. Figure 4 IF THE FIREPLACE STOP WORKING, THAT ALL FUNCTION BUTTONS CAN NOT BE OPERATING. PLEASE TURN OFF THE FIREPLACE POWER, THEN RESTART AFTER 8 SECONDS. MODEL:ZHS-32-F PAGE 6 OF 10...
Page 7
Consult the dealer or an experienced radio/TV technician for help. • To comply with FCC’s RF radiation exposure limits for general population/uncontrolled exposure, this device must be installed to provide a separation distance of at least 20cm from all persons. MODEL:ZHS-32-F PAGE 7 OF 10...
4. Do not use abrasive cleaners or spray liquids on any part of the appliance. 5. Periodic cleaning/vacuuming of the fan/heater unit is strongly recommended to ensure that no dirt or foreign objects build up. MODEL:ZHS-32-F PAGE 8 OF 10...
ON also. NOTE: If you experience difficulties, please do not return this product to store. Any missing parts, hardware or assembly problems, please call our customer service center at 1-877-355-3326. MODEL:ZHS-32-F PAGE 9 OF 10...
DO NOT use rechargeable silver oxide cell batteries with Remote control unit DO NOT mix alkaline, standard(Carbon-Zinc), or rechargeable(Nickel-Cadmium) batteries. DO NOT dispose of batteries in fire. Improper disposal may cause batteries to leak or explode. MODEL:ZHS-32-F PAGE 10 OF 10...
Need help?
Do you have a question about the ZHS-32-F and is the answer not in the manual?
Questions and answers
How do you make the blower work
The blower on the Febo Flame ZHS-32-F operates automatically when the heater is turned on. When the heater is turned off, the blower continues to run for 60 seconds to cool down the unit. There is no separate control for the blower; it functions as part of the heater operation.
This answer is automatically generated
How do you turn on the blower?
To turn on the blower (heater) for the Febo Flame ZHS-32-F, press the "HEATER" button on the control panel or use the multifunction remote control.
This answer is automatically generated