Advertisement
Removing the Processor Board
To access the processor board the recorder must be placed face down on the bench. Ensure the surface is suitable and
that the front of the recorder will not get scratched.
Remove the 4 screws (M3x6mm) that secure the processor board to the chassis.
The figures below show the position of these screws. Fig 3 QX, Fig 4 SX.
43-TV-33-58 iss.1 GLO June 06 UK
Fig 3 QX Recorder
Remove 4
screws
Fig 4 SX Recorder
Remove 4
screws
3
Advertisement
