8.2.9.
Lock / Unlock Selector
1. Remove the Top Cover Assy. (See 8.2.4.)
2. While releasing the tip of the Lock / Unlock Selector in the
direction of the arrows (1), push the selector in the direction
of the arrow (2) to remove it.
8.2.10. CONTROL Board
1. Remove the Top Cover Assy. (See 8.2.4.)
2. Remove the 4 screws (e) and disconnect all connectors on the
CONTROL Board.
8.2.11. Motor Assy.
1. Remove the Top Cover Assy. (See 8.2.4.)
2. Remove the 3 screws (a), 1 screw (a) with washer, and
1 screw (c).
3. Disconnect the 1 connector.
25