8 DISASSEMBLY INSTRUCTIONS
8.1.
Disassembly Flowchart
The following flowcharts indicate the disassembly sequence for the Exterior, Mechanical parts, Unit Components,
and Circuit Board assemblies
When reassembling, perform the steps in the reverse order unless otherwise instructed in the Reassembling Notes.
Note:
• After reassembling all parts constituted, make sure that the LOCK / UNLOCK Selector is set to UNLOCK.
Then after turning on the scanner, make sure that the Scanning Unit goes back to the default (home) position
and the LED (Green) on the Panel Cover lights.
19