Signal Booster Specifications - WILSON PRO A500 - 3G/4G Installation Instructions Manual

Signal Booster Specifications

Model Number
Connectors
Antenna Impedance
Frequency
Power output for single cell phone (dBm)
3
Passband Gain (nominal)
Noise Figure (typical downlink/uplink)
Power Requirements
!
To Outside
Antenna
Lightning
Surge Protector
Ground Wire
(not included)
To Signal Booster
Band 1 (2100)
B1
Uplink 21
Downlink 10
B1
64
RECOMMENDED: INSTALLING THE LIGHTNING SURGE PROTECTOR
INSTALL THE LIGHTNING SURGE PROTECTOR (LSP) CLOSE TO THE
SIGNAL BOOSTER. ATTACH THE CABLE FROM THE OUTSIDE ANTENNA TO
THE SURGE PROTECTOR. ENSURE THE LSP IS PROPERLY GROUNDED.
Need help? support@techlineglobal.com
WilsonPro A500-3G/4G
520001
N-Female
50 Ohms
Band 3 (1800)
B3
21
10
B3
61
5 dB nominal
5V DC, 1.5A
Band 8 (900)
B8
21
10
B8
70
9