IT IS VERY IMPORTANT THE SIGNAL BOOSTER UNIT IS DESIGNED TO POWER YOUR SIGNAL FOR USE IN AN INDOOR, TEMPERATURE- BOOSTER USING A SURGE CONTROLLED ENVIRONMENT (LESS PROTECTED AC POWER THAN 65 DEGREES CELSIUS). IT IS STRIP WITH AT LEAST A 1000 NOT INTENDED FOR USE IN ATTICS OR SIMILAR JOULE RATING.
Signal booster and available accessories WilsonPro Outside Antenna Panel Antenna 2’ Wilson 400 Cable Power Supply A500 - 3G/4G ™ (314411) (311135) (952302) (2D9116) Appearance of device and accessories may vary. 60’ Wilson 400 Cable (859992) 75’ Wilson 400 Pole Mount Bracket...
numerical signal strength can be the signal appears the strongest. read. This is more accurate than (Note: cell phone bars are only the bar indicator. an approximation of signal strength and vary from phone b. The person on the roof should turn to phone.) Phones can take up the Outside Antenna 45 degrees to 30 seconds to reset to a new...
If you do not know how to mount Once you have ensured all hardware or run coax cable through connections are tight, connect the walls, ceilings and floors, get help Signal Booster to a surge protected from a from a qualified contractor or power strip with at least a 1000 Joule electrician.
Antenna and Inside Antenna at the Use the mounting hardware included designated ports. in the package to secure the Inside Antenna to the selected location. Powering Up The Signal Booster Ensure the cables to both the Outside Antenna and Inside Antenna are Do NOT connect the Signal Booster securely connected before powering to the power source until all cables...
to prevent overload (too strong of a If the light remains orange or the signal from a cell tower). coverage area is still too small, contact the Customer Support for Solid Red indicates the WilsonPro assistance. A500-3G/4G has shut down to prevent oscillation (feedback).
Safety Guidelines WARNING: Connecting the Signal Booster directly to the cell phone with use of an adapter will damage the cell phone. WARNING: Use only the power supply provided in this package. Use of a non- Wilson Electronics product may damage your equipment. WARNING: The Signal Booster unit is designed for use in an indoor, temperature-controlled environment (less than 65 degrees Celsius).
Signal Booster Specifications WilsonPro A500-3G/4G Model Number 520001 Connectors N-Female Antenna Impedance 50 Ohms Frequency Band 1 (2100) Band 3 (1800) Band 8 (900) Power output for single cell phone (dBm) Uplink Downlink Passband Gain (nominal) Noise Figure (typical downlink/uplink) 5 dB nominal Power Requirements 5V DC, 1.5A...
Page 10
1-Year Warranty WilsonPro Signal Boosters are warranted for one (1) year against defects in workmanship and/or materials. Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by WilsonPro. WilsonPro shall, at its option replace the product.
Page 11
WilsonPro A500 - 3G/4G ™ Amplificateur de signal Besoin d'aide ? support@techlineglobal.com...
Page 12
IL EST TRÈS IMPORTANT L'AMPLIFICATEUR DE SIGNAL DE BRANCHER VOTRE EST CONCU POUR ÊTRE UTILISÉ AMPLIFICATEUR DE SIGNAL À L'INTÉRIEUR, DANS UN À UN ONDULEUR CA D'UNE ENVIRONNEMENT À TEMPÉRATURE PUISSANCE NOMINALE D'AU CONTRÔLÉE (INFÉRIEURE À 65 DEGRÉS MOINS 1000 JOULES. CELSIUS).
Ampli de signal cellulaire et accessoires disponibles WilsonPro Antenne extérieure Antenne Câble Wilson 400 60 cm Alimentation A500-3G/4G ™ (314411) du panneau (952302) (2D9116) (311135) L'aspect de l'appareil et des accessoires peut varier. Câble Wilson 400 18 m Câble Wilson 400 23 m Support de montage Support de montage Parasurtenseur...
a. La personne à l'intérieur doit avoir son (Remarque : sur un téléphone téléphone en mode test pour pouvoir cellulaire, les barres n'indiquent lire la puissance du signal numérique. qu'une puissance approximative du Cette méthode est plus précise que signal, et cette mesure est variable l'affichage des barres de réception.
Nous vous recommandons d'installer le Si votre WilsonPro A500-3G/4G parasurtenseur (859992). Fixez le câble fonctionne au mieux, les voyants sont provenant de l'antenne extérieure au allumés en vert. Si les voyants ne sont parasurtenseur et reliez ce dernier à la terre. pas allumés en vert, consultez la section Résolution de problèmes.
Mise sous tension de Ne raccordez PAS l'amplificateur de signal à la source d'alimentation, l'amplificateur de signal tant que tous les câbles ne sont pas raccordés. Vérifiez que les câbles raccordés à l'antenne extérieure et à l'antenne Installation de l'antenne intérieure sont correctement fixés, avant intérieure de mettre l'amplificateur de signal sous...
Un voyant rouge allumé indique que le REMARQUE : l'amplificateur de signal WilsonPro A500-3G/4G s'est éteint pour peut être réinitialisé en débranchant et en éviter une oscillation (retour). rebranchant l'alimentation. Un voyant orange allumé indique que Questions fréquentes le WilsonPro A500-3G/4G s'est éteint pour éviter une surcharge (un signal trop Comment la météorologie influence-t-elle puissant émanant d'un relais cellulaire).
Consignes de sécurité AVERTISSEMENT : Le raccordement direct de l'amplificateur de signal au téléphone cellulaire au moyen d'un adaptateur endommage le téléphone cellulaire. AVERTISSEMENT : N'utilisez que l'alimentation fournie dans ce paquet. L'utilisation d'un produit autre que Wilson Electronics peut endommager votre matériel.
Garantie de 1 an Les amplificateurs de signal WilsonPro sont garantis pendant un (1) an contre les défauts de fabrication et/ou de matériel. Le retour au fabricant s'effectue au frais du client, avec une preuve d'achat datée et un numéro d'autorisation de renvoi de matériel (RMA) fourni par WilsonPro.