IN THE EVENT OF A POWER SURGE OR LIGHTNING STRIKE. Installation Instructions for the Following Signal Booster: WilsonPro A1000 - 3G/4G™ 2100 IMT (BAND 1) / 1800 DCS ( Band 3) / 900 E-GSM, GSM (Band 8) Model # ? Contents Package Contents .
2. Wall mount or Rafter mount - Drill and 3/16 inch bit, Phillips-head screwdriver Before Getting Started Find the Strongest Cellular Signal Before you install your A1000-3G/4G and Before you install your A1000-3G/4G signal start enjoying improved cellular reception booster, you must determine the location of in your facility, please do the following: the best available cellular signal.
This creates potential oscillation towers or the strongest signal. Go or feedback and reduces the to the App Store and search for effectiveness of the A1000-3G/4G. “cell signal” to find available apps for your device. If you do not know how to mount...
6m of vertical or 15m of from the nearest cellular tower. horizontal separation from the Internal Select a location to install the A1000- Antenna. 3G/4G Signal Booster that is well After connecting the coax cable to the...
Inside Antenna Installation Inside Antennas can be mounted above ceiling drywall, on a ceiling Select a location in the center of inside a room, or on a wall inside a the area where you want cellular room. Ensure the Inside Antenna is signals improved to mount the Inside facing AWAY from the Outside Antenna Antenna.
Outside Antenna away from the strongest cellular signal in small The A1000-3G/4G also has two unique light increments until the light turns green. functions – green with an alternating red, If the Signal Booster will not respond, and green with an alternating orange.
Safety Guidelines WARNING: Connecting the Signal Booster directly to the cell phone with use of an adapter will damage the cell phone. WARNING: Use only the power supply provided in this package. Use of a non- Wilson Electronics product may damage your equipment. WARNING: The Signal Booster unit is designed for use in an indoor, temperature-controlled environment (less than 65 degrees Celsius).
Signal Booster Specifications WilsonPro A1000-3G/4G Model Number Connectors N-Female Antenna Impedance 50 Ohms Frequency Band 1 (2100) Band 3 (1800) Band 8 (900) Power output for single cell phone (dBm) Uplink Downlink Passband Gain (nominal) Noise Figure (typical downlink/uplink) 5 dB nominal Power Requirements 5.5V DC, 1.5A...
Page 10
Notes: Need help? support@techlineglobal.com...
Page 11
Notes: Need help? support@techlineglobal.com...
1-Year Warranty WilsonPro Signal Boosters are warranted for one (1) year against defects in workmanship and/or materials. Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by WilsonPro. WilsonPro shall, at its option replace the product.