Connect Power Cord - Philips HTS3375X/78 Quick Start Manual

Note
•
To listen to the audio output from this connection,
press AUDIO SOURCE repeatedly until 'OPTI IN' is
displayed on the display panel.
Connect portable media player
MP3
1
Connect a 3.5mm stereo audio cable (not
supplied) to the MP3 LINK jack on this
Home Theater System and the phone
jack on the portable media player (such as
MP3 player).
Note
•
To listen to the audio output from this connection,
press AUDIO SOURCE repeatedly until 'MP3 LINK'
is displayed on the display panel.
Connect USB device
1
Connect the USB device to
on this Home Theater System.
•
This Home Theater System can only play/view MP3,
WMA, DivX (Ultra) or JPEG fi les that are stored on
such devices.
•
Press

Connect power cord

•
Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed
on the back or the underside of the Home Theater
System.
•
Before connecting to a socket, set the voltage
selector (at the rear or bottom of this Home Theater
System) to the local power line voltage.
1
Connect the power cord to the socket
when all the required connections are
made.
»
USB jack
Note
USB to access the content and play the fi les.
Warning
The Home Theater System is ready to
be set up for use.
EN 15