Table of Contents
Advertisement
Connect video cables
Connect this Home Theater System to TV to
view disc play. Select the best video connection
that the TV can support.
•
Option 1: Connect to the HDMI jack (for
a HDMI, DVI or HDCP-compliant TV).
•
Option 2: Connect to the component
video jacks (for a standard TV or
progressive scan TV).
•
Option 3: Connect to the video (CVBS)
jack (for a standard TV).
Note
•
You must connect this Home Theater System
directly to a TV.
Option 1: Connect to the HDMI jack
HDMI IN
1
Connect an HDMI cable to the HDMI
OUT jack on this Home Theater System
and the HDMI input jack on the TV.
Note
•
If your device supports HDMI CEC, you can control
compliant devices with a single remote control. (see
'Get started' > 'Use Philips EasyLink').
HDMI OUT
Tip
•
If the TV has a DVI connection only, connect via
a HDMI/DVI adaptor. Connect an audio cable for
sound output.
•
You can optimise the video output. (see 'Adjust
settings' > 'Video setup' > [HDMI Setup] ).
•
This type of connection provides the best picture
quality.
Option 2: Connect to the component
video jack
Y
Pb
Pr
1
Connect the component video cable
(not supplied) to the Y Pb Pr jacks on
this Home Theater System and the
COMPONENT VIDEO input jacks on the
TV.
•
If a progressive scan TV is used, you
may turn on the progressive scan
mode. (see 'Get started' > 'Turn on
progressive scan').
Note
•
The component video input jack on the TV might be
labelled as Y Pb/Cb Pr/Cr or YUV.
•
This type of connection provides good picture
quality.
Y
Pb
Pr
VIDEO OUT
EN
11
Advertisement
Table of Contents
