Connect Lan; Connect Power Cord - Philips HTS7200 User Manual

1
Connect a 3.5 mm stereo audio cable
(not supplied) to the MP3 LINK jack
on this Home Theatre System and the
phone jack on the portable media player
(such as MP3 player).
Note
•
To listen to the audio output from this
connection, press AUDIO SOURCE
repeatedly until 'MP3 LINK' is displayed on the
display panel.
Connect USB device
1
Connect the USB device to
on this Home Theatre System.
Note
• This Home Theatre System can only play/view
MP3, WMA, DivX (Ultra) or JPEG fi les that are
stored on such devices.
•
Press USB to access the content and play the
fi les.

Connect LAN

Connect this Home Theatre System to the
network for software updates and enjoy BD-
Live applications.
16 EN
1
•
•

Connect power cord

USB jack
•
1
Connect the network cable (not
supplied) to the LAN jack on this Home
Theatre System and the LAN jack on the
broadband modem or router.
Note
Use an RJ45 straight cable. Do not use a
crossover cable.
Internet access to Philips website for software
updates may not be allowed, depending on
the router you use or the Internet Service
Provider's policy. Contact your Internet
Service Provider for more information.
Warning
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
Connect the power cord to the socket
when all the required connections are
made.
»
This product is ready to be set up for
use.