Connect USB device
1
Connect the USB device to
on this Home Theater System.
Note
•
This Home Theater System can only play/view
MP3, WMA, DivX (Ultra) or JPEG À les that are
stored on such devices.
•
Press
USB to access the content and play the
À les.
14
EN
Connect LAN
Connect this Home Theater System to the
network for software updates and enjoy BD-
Live applications.
USB jack
1
•
•
Connect power cord
•
1
Connect the network cable (not
supplied) to the LAN jack on this Home
Theater System and the LAN jack on the
broadband modem or router.
Note
Use an RJ45 straight cable. Do not use a
crossover cable.
Internet access to Philips website for software
update may not be allowed, depending on
the router you use or the Internet Service
Provider's policy. Contact your Internet
Service Provider for more information.
Warning
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
Connect the power cord to the power
outlet when all the required connections
are done.
»
This product is ready to be set up for
use.