Table of Contents
Advertisement
3.1 Introduction
CHAPTER 3
INSTALLATION
INSTALLA TION
This chapter tells you how to install the Python DDS-DC DAT drives. Some of the information relates to all
Python models drives; other information is specifically based on the drive model. The following paragraphs
briefly outline the organization of this chapter.
o
Section 3.2 lists guidelines for handling the 4322 and 4542 drives.
o
Section 3.3 contains general infonnation that you should read before you begin the installation.
o
Section 3.4 gives specific cabling requirements and connector pinouts for the drives.
o
Section 3.5 describes installing Model 4322, the 3.5-inch internal drive, and Model 4542, the 3.5-
inch drive with 5.25-inch mounting rails and bezel.
o
Section 3.6 describes installing Model 4352, the external subsystem.
3.2 Guidelines and Cautions (4322 and 4542 Internal Models)
The following guidelines and cautions apply to handling and installing Python 4322 and 4542 internal drives.
Keep them in mind as you install the drive.
o
Because Python internal drives contain components that are sensitive to static electricity, the drives
are shipped in a protective anti-static bag. DO NOT remove the drive from the anti-static bag until
you are ready to install it.
o
Before you remove the drive from the anti-static bag, touch a metal or grounded surface to
discharge any static electricity buildup from your body.
CAUTION:
If you touch static-sensitive parts of the drive, such as a printed circuit board,
and discharge static electricity, the components may be damaged
o
Hold the drive by its edges only and avoid direct contact with any printed circuit board exposed.
o
Lay the drive only on top of the anti-static bag or return it to the bag when you need to lay it down.
3-1
Advertisement
Table of Contents
