Network Page - Brainboxes ES Series Product Manual

Network Page

Device Network Address: Here you can change the device's IP address, subnet mask and
gateway address. By default the device is set to obtain an IP address automatically by DHCP.
If you need the device to use a static IP address, click on the "Assign Static IP Address" radio
button, then enter the IP address, subnet mask and gateway into the text boxes. Click "Apply
Changes" to save the network address settings.
Other Settings
Web Server Port: To change the web server port number, edit the number in Web
o
Server Port box and click the "Apply Changes" button.
UPnP: Turning the UPnP of your device off or on can only be done using the web page
o
interface. Turning UPnP off will mean that the ES Device won't be broadcasting on the
network. This means you won't be able to find the device using Boost.LAN Manager.
You can however add the device manually if you know the IP address and web server
port number. If you are using Boost.LAN Manager it is recommended that you install the
driver before turning off the UPnP. This will ensure that when Boost.LAN is opened, the
installed device will be displayed in the Boost.LAN device manager panel.
ES Industrial Range
Product Manual V3.3
© Copyright Brainboxes Ltd Page 35 of 53