Rebooting Device; Restoring To Factory Default - Brainboxes ES Series Product Manual

Rebooting Device

We strongly recommend that you check that the device is NOT in operation before doing this to
prevent data loss.
If for any reason you wish to reboot your device, whilst still retaining the existing settings:
2) Open Boost.LAN Manager
3) Find and select the ES device you wish to reboot.
4) On the left hand panel of the window, scroll down to the "Other Tasks" section and click
"Reboot Device
5) Click OK to confirm that you want to reboot your device.
6) The status LED will flash red/green and the device will reboot.. Any connections you may
have had to the COM port may need to be reopened.

Restoring to Factory Default

We strongly recommend that you check that the device is NOT in operation before doing this to
prevent data loss.
If for any reason you wish to restore the ES device back to factory default settings:
1) Open Boost.LAN Manager
2) Find and select the ES device.
3) On the left hand side of the window, scroll down to the "Other Tasks" section
4) Select "Restore Factory Settings"
ES Industrial Range
Product Manual V3.3
© Copyright Brainboxes Ltd Page 29 of 53