Finding Your Brainboxes Com Port; Changing Your Com Label - Brainboxes ES Series Product Manual

Finding your Brainboxes COM port

1. Open Boost.LAN Manager (Found by clicking Start
Boost.LAN Boost.LAN Manager).
2. Click on your installed ES Device.
3. Find the "COM Ports" section in the left hand pane.

Changing your COM label

1. If you need to change the COM label, find your Brainboxes COM port (using the section
Finding your Brainboxes COM port) then double click on the port entry in Boost.LAN
Manager.
2. Click on the 'Port Settings' tab and click 'Advanced...'
3. A new COM Port label can be selected from the dropdown menu. Click 'OK' to set the new
COM Label.
4. If the COM Port number is labelled "in use", it is either currently used by a COM Port present
on the system, or is reserved for a device which is not currently present. It is possible to
select this COM number and force the change, if you are sure it is not required by any other
device.
ES Industrial Range
Product Manual V3.3
All Programs
© Copyright Brainboxes Ltd
Brainboxes
Page 21 of 53