A box will appear which allows you to enter a new name for the device. Enter the new name for the
device and click 'Update'. After a few seconds the device name will be updated in Boost.LAN
Manager.
Changing Port Settings
The Port Settings allow you to set Default or Override Settings for the serial communication and set
how the device will deal with incoming hardware handshaking events.
To change the port settings, open Boost.LAN Manager and double click on the Brainboxes
•
COM Port Entry of your installed industrial device. If your device is not installed see Installing
Ethernet to Serial Device Driver.
Then Click on the 'Port Settings' tab.
•
ES Industrial Range
Product Manual V3.3
© Copyright Brainboxes Ltd
Page 23 of 53