Select A Play Source - Philips HTS6100/12 Quick Start Manual

7
Select [ OK ] in the menu, then press OK
to start scanning of devices.
Once complete, audio input mapping
menu is displayed.
Audio Input Mapping
AUX1 Input
AUX2 Input
AUX3 Input
Digital Input
• For example, if your TV audio is
connected to the AUX IN-AUX 1
sockets on this unit, select [ AUX1
Input ] and map onto the correct
device (brand name) shown at the right
panel.
8
Select the audio input of this unit that is
used to connect to other HDMI device
(e.g. AUX1 Input, AUX2 Input), then press
B.
9
Select the correct connected device, then
press OK.
• Repeat steps 8~9 to map other
connected devices.
10
To exit the menu, press OPTIONS.
24 EN
TV
Other (non-HDMI)

Select a play source

On the main unit
1
Press SOURCE button repeatedly to
select: DISC > USB > RADIO FM >
DIGITAL INPUT > AUX SCART >
AUX1 INPUT > AUX2 INPUT > AUX3
INPUT > MP3 LINK > DISC ...
On the remote control
• Press DISC to switch to DISC mode.
• Press USB to switch to USB mode.
Press RADIO to switch to FM band.
•
Press AUX/DI /MP3 LINK repeatedly to
•
select other external devices.
Display Device connected to
AUX SCART SCART socket.
AUX1 INPUT AUDIO IN-AUX1 sockets.
AUX2 INPUT
AUDIO IN-AUX2 sockets.
AUX3 INPUT
AUDIO IN-AUX3 sockets.
DIGITAL
DIGITAL IN-COAXIAL
INPUT
socket.
MP3 LINK
MP3 LINK socket.