Mount the DVD Home
Theatre unit
Caution!
•
Risk of personal injury and damage to the unit.
Allow only qualifi ed persons to mount the unit.
1
Ensure all the required cables are
connected to this unit and close the rear
cover.
2
Attach the supplied knobs to the rear of
this unit.
3
Turn this unit over so that its bottom faces
up.
4
Hold this unit fi rmly while removing the
rubber feet by pushing it towards the back
of this unit. Repeat the step to remove the
other rubber feet.
5
Position the supplied bracket on the wall,
drill the screw holes and insert the rubber
wall plugs (not supplied) into the holes.
Tips
•
To mount this DVD Home Theatre unit below your
TV, leave at least 10cm (4 inches) of space between
the TV and the bracket.
EN
17