Advertisement
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Walker continued...
7a.
Attach the side arms to the connectors on the
7
underside of the Top Frame, taking care to match
the height position chosen at the Front Support.
(i.e 1 or 2, marked on the outside of the Top Frame).
7b.
While holding the red lock down, slide the side
arm into the Top Frame.
7c.
Repeat for other side arm.
9a.
Add Rear Support.
9
To assemble Toy Tray...
1a.
Turn Toy Tray over and unscrew the battery
1
cover.
1b.
Insert 2 x AA batteries (sold separately).
1c.
Replace battery cover by screwing back into
place.
IMPORTANT! Please note that a screwdriver (not included) is required
to access the Toy Bar Battery Pack to insert 2 x AA Batteries (sold
separately).
2
1
Advertisement
