Advertisement
ASSEMBLY / OPERATING INSTRUCTIONS
To convert to Walk Behind Mode...
1a.
Push the release button on the Front Support and lift
1
Fold Out Arm away.
2a.
Slide the red lever on the side arm and push the red
2
button on the Seat while sliding the arm to release.
Repeat for other side arm.
3a.
Reconnect the side arms to the Base
3
Assembly by sliding the red lever while
locating the arm into the base.
4a.
Press the grey levers on each side of the Rear
4
Support and remove the support completely.
5a.
Stand the Walker upright.
5
5b.
The Walk Behind Mode is now ready for use.
Advertisement
