Advertisement
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Walker...
Place the Seat Pad on the Top Frame and thread
2a.
2
the 8 x plastic clips through the Frame.
3a.
From the underside, clip the tabs onto the
3
frame lugs.
Turn the Base Assembly upright and insert the
4a.
4
Front Support by pushing the blue buttons to
position one for the lower setting, or position
two for the higher position.
5a.
Attach the Top Frame to the Front Support by
5
pushing down to lock into place.
6a.
Release the side arms from the Base Assembly
6
by sliding the red lock and lifting up.
Advertisement
