Summary of Contents for Redrock microRemote
- Page 1 System User Guide redrockmicro.com/microremote support@redrockmicro.com 1-888-214-3903...
-
Page 2: Table Of Contents
Technical Specifications 16 A dvanced Features 18 Cables The microRemote system complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (I.) this device may not cause harmful interference and (II.) 20 Troubleshooting this device must accept any interference received, including interference that may cause undesired operation. -
Page 3: Quick Set-Up Diagrams
External battery or Motor (page 12,13) AC power Redrock Powerpack microTape Wired Handheld (Optional) (Optional) *Shown on a Redrock ultraCage Studio bundle. Visit redrockmicro.com for more rig configurations. 4 Quick Start Q uick Start... -
Page 4: Quick Start Guide
have purchased some of the items described within, as this manual is comprehensive one end of the lens to the other, then return to the position of the controller. Your of the entire microRemote System. Please review this entire manual before attempting your lens is now calibrated. -
Page 5: The Handheld Unit
Q Radio channel selector F Adjustable indicator L Radio compartment *With optional cable (camera speci c, camera capable) camera **See page 17 for illuminated marking disk 8 Handheld Handheld run/stop can be controlled from the microRemote. information... -
Page 6: The Motor
Basestation The Basestation controls all the major functions of the microRemote system: lens calibration, motor torque adjustment, and accessory control. Mounting to Your Rig Attach a microMount™ or other 1/4-20 mounting device to any 15mm rod ... - Page 7 Torque Motor™ Mounting to The Torque Motor is designed with a small Your Rig footprint, making it perfect for compact rigs but powerful enough for almost any set-up. The Torque Motor comes with a 15mm rod Loosen the motor thumb screw, ...
-
Page 8: The Fingerwheel Controller
Fingerwheel Controller The Fingerwheel controller mounts to Redrock Micro Mounting to Your Rig handgrips as well as any other .878” diameter rails. Once mounted to a handgrip, the Fingerwheel Once the Fingerwheel is mounted to controller allows you to support your rig and pull focus ... -
Page 9: Advanced Features
off. Snap an illuminating flare (B) to initiate glow, and flex The microGain Matrix allows you to customize the sensitivity of your microRemote to better until it glows evenly throughout. accommodate your personal touch. The Motor’s torque power is inversely related to the smoothness of ... -
Page 10: Cables
Cable Guide 7 pin Motor Cable We strongly recommend the use of Redrock Micro cables when connecting your remote gear. This will Connects Motor to Basestation help ensure safe, reliable use. This guide will help you choose the right cables. -
Page 11: Troubleshooting
Troubleshooting Motor: Handheld/Basestation Wireless Communication: Communication Issues 1. Make sure you are using the right cable (part #2-100-0011) and that is fully plugged into the Check that the Wireless Indicator LED is illuminated on the Handheld. If the Handheld is motor port on the Basestation. - Page 12 Basestation Handheld Fingerwheel Troubleshooting Checklist Motor Cables 22 Troubleshooting Troubleshooting...
Need help?
Do you have a question about the microRemote and is the answer not in the manual?
Questions and answers