Listen To Radio - Philips HTS6120/37 User Manual

Listen to radio

1
Press RADIO .
2
Use the remote control to control the
radio.
Button Action
Selects a preset radio station.
Tunes the radio frequency up or
down.
Press and hold this button to
erase the current radio station
from the preset list.
The preset number for other
radio stations remain unchanged.
Tip
•
Press AUDIO SYNC to toggle between FM
stereo and FM mono mode.
Reinstall all the radio stations
1
Press RADIO .
2
Press and hold PROGRAM for more than
5 seconds.
»
All previously stored radio stations are
replaced.
Note
•
Check the radio antenna connection if no
stereo signal is detected or less than 5 stations
are detected during radio installation.
34 EN
Search and store radio stations
individually
1
Press RADIO .
2
Press / .
»
It starts searching until a radio station
is detected.
3
Repeat step 2 until you tune to the radio
station you wish to store.
• To À netune the radio frequency,
press / .
4
Press PROGRAM .
»
The preset station number blinks.
»
If no action is carried out within 20
seconds after the above step, it exits
the preset mode.
5
Press / (or the Numeric buttons ) to
select a preset number to store.
6
Press PROGRAM to conÀ rm.