Philips HTS6120/37 User Manual page 25

One-touch standby
When you connect your Home Theater
System to devices that support standby, you
can use your Home Theater System remote
control to put your Home Theater System
and all connected HDMI devices in standby
mode. You can perform one-touch standby
using the remote control from any of the
connected HDMI devices.
System Audio Control
When you connect your Home Theater
System to HDMI CEC compliant devices,
your Home Theater System can switch
automatically to play audio from the
connected device.
To use one-touch audio, you must map the
audio input from the connected device to
your Home Theater System.
Audio Input Mapping
When you map the audio input correctly, this
Home Theater System switches to the audio
from the played device automatically.
Map the audio inputs to the
connected devices
Note
•
Before you start, ensure that the audio output
of the HDMI TV and other HDMI devices have
been connected to the audio input jacks on
this Home Theater System.
EasyLink Setup
Disc Lock
Display Dim
OSD Language
Screen Saver
Sleep Timer
Low Power Standby
DivX(R) VOD Code
EasyLink
One Touch Play
One Touch Standby
System Audio Control
Audio Input Mapping
1
Press DISC .
2
Press SETUP .
» [General Setup] menu is displayed.
3
Press .
4
Select [EasyLink Setup] , then press
• [One Touch Play] and [One Touch
Standby] functions are turned on by
default in the factory.
5
Select [System Audio Control] > [On] ,
then press OK to start scanning devices.
»
Once complete, audio input mapping
menu is displayed.
Aux1 Input
Aux2 Input
Aux3 Input
Coaxial Input
Optical Input
6
Select the audio input of this Home
Theater System that is used to connect to
other HDMI device, then press .
• For example, if the TV audio is
connected to the AUX1 jack on this
Home Theater System, select [Aux1
Input] and map with the TV (brand
name) at the right panel.
7
Select the correct connected device, then
press OK .
»
Repeat steps 5~7 to map other
connected devices.
8
Press SETUP to exit the menu.
[TV]
[DVD 3400]
other(non-HDMI)
EN 25