Related Manuals for Philips HTS6120/12
Summary of Contents for Philips HTS6120/12
- Page 1 Register your product and get support at www.philips.com/welcome EN User manual DE Benutzerhandbuch ES Manual del usuario FR Mode d’emploi NL Gebruiksaanwijzing HTS6120...
-
Page 3: Table Of Contents
Mount the product 4 Get started Insert the remote control batteries Find the correct viewing channel Start Ambisound setup Turn on Progressive Scan Use Philips EasyLink Select a play source 5 Play Play a disc Play video Play music Play photo... -
Page 4: Important
1 Important Safety and important notice Warning • Risk of overheating! Never install the product in a confi ned space. Always leave a space of at least 4 inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. -
Page 5: Trademark Notice
Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. - Page 6 HDMI, and HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. The USB-IF Logos are trademarks of Universal Serial Bus Implementers Forum, inc. Made for iPod iPod is a trademark of Apple Inc., registered in the U.S.
-
Page 7: Your Product
2 Your product Congratulations on your purchase, and welcome to Philips! To fully benefi t from the support that Philips offers; register your product at www.philips.com/welcome. Feature highlights Philips EasyLink Your product supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. -
Page 8: Product Overview
Product overview Main unit ( Standby-On ) • Turns on the Home Theatre System or switches to standby mode. b SOURCE • Selects a media to play or listen to audio from the connected device. c VOL +/- • Increases or decreases volume. STOP •... - Page 9 c Source buttons • DISC: Switches to the disc source. • USB: Switches to the USB source. • RADIO: Switches to FM radio. • AUDIO SOURCE: Selects an audio input source. • iPod DOCK: Switches to the iPod in the dock. SETUP •...
-
Page 10: Connect
• To reduce interference or noise, place the home theatre away from radiation devices. • You can purchase a separate table top stand that supports both your Philips Plasma/LCD TV and this Home Theatre System from the nearest Philips retailer. -
Page 11: Connect Video Cables
Note • If your device supports HDMI CEC, you can control compliant devices with a single remote control. (see ‘Get started’ > ‘Use Philips EasyLink’). • If the TV has a DVI connection only, connect via a HDMI/DVI adaptor. Connect an audio cable for sound output. - Page 12 Option 2: Connect to the SCART jack Connect a scart cable to the SCART jack on the Home Theatre System and the SCART input jack on the TV. Note • Scart connection allows TV’s audio output through the speakers. Press AUDIO SOURCE repeatedly until ‘SCART INPUT’...
-
Page 13: Connect The Subwoofer
Connect the subwoofer Unwind the subwoofer’s interconnect cable at TO MAIN UNIT. Connect the white end of the interconnect cable to the LOUDSPEAKERS jack on the Home Theatre System. Connect the grey end of the interconnect cable to the TO SUBWOOFER jack on the Home Theatre System. -
Page 14: Connect Audio Cables/Other Devices
Connect audio cables/other devices Route the audio from other devices to this Home Theatre System to enjoy audio play with multi-channel surround capabilities. Connect audio to TV (also used for EasyLink control) Connect the audio cables (not supplied) to the AUDIO IN-AUX1 jacks on this Home Theatre System and the AUDIO output jacks on the TV. - Page 15 Connect to coaxial jack Connect a coaxial cable (not supplied) to the COAXIAL DIGITAL-IN jack on the subwoofer and the COAXIAL/DIGITAL output jack on the device. Note • To listen to the audio output from this connection, press AUDIO SOURCE repeatedly until ‘COAXIAL INPUT’...
-
Page 16: Connect Power Cord
Connect iPod docking station Connect the iPod docking station (optional accessory - not supplied) to FOR iPod DOCK jack on the Home Theatre System. To view videos/photos from an iPod, connect a composite video cable from the docking station to the TV and switch the TV to the correct viewing channel. - Page 17 Turn the Home Theatre System over so that its bottom faces up. Remove the rubber feet by pushing them towards the back of the Home Theatre System. Repeat the step to remove the other rubber feet. Position the supplied bracket on the wall, drill the screw holes and insert the rubber wall plugs (not supplied) into the holes.
-
Page 18: Get Started
• Go to the lowest channel on your TV, then press the Channel Down button until you see the Philips screen. • Press the SOURCE button repeatedly on the remote control of... -
Page 19: Start Ambisound Setup
• The video-in channel is between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO, HDMI etc. See the TV user manual on how to select the correct input on the TV. Start Ambisound setup When you turn on the Home Theatre System for the fi... -
Page 20: Turn On Progressive Scan
Select the height at which the Home Theatre System is placed, then press . » [Listening Position] screen is displayed. Select the distance between your listening position and the SoundBar system: Near (< 2m / 6.5ft) Default (2-3m / 6.5-9.8ft) Far (>... -
Page 21: Use Philips Easylink
HDMI CEC devices. Turn on the HDMI CEC operations on the TV and other connected devices. See TVs/devices manual for details. You can now enjoy the following Philips EasyLink controls. EasyLink You can turn off or turn on all EasyLink features. - Page 22 Map the devices to the audio inputs Note • Before you start, ensure that the audio output of the HDMI TV and other HDMI devices have been connected to the audio input jacks on this Home Theatre System. EasyLink Setup Disc Lock Display Dim OSD Language...
-
Page 23: Select A Play Source
Select a play source On the main unit • Press SOURCE button repeatedly to select: DISC > iPOD > RADIO FM > COAXIAL INPUT > OPTICAL INPUT > SCART INPUT > AUX1 INPUT> AUX2 INPUT > AUX3 INPUT > MP3 LINK >... -
Page 24: Play
5 Play Play a disc Caution • Never place any objects other than discs into the disc compartment. • Never touch the disc optical lens inside the disc compartment. Press to open the disc compartment. Insert a disc with its label facing up. •... - Page 25 Change video play Play a title. Use the remote control to change the video play. Button Action AUDIO Selects an audio language or SYNC channel. SUBTITLE Selects a subtitle language for video. REPEAT Selects or turns off repeat or shuffl e mode. •...
-
Page 26: Sync Audio Output With Video Play
Sync audio output with video play If the video play is slower than the audio output (sound does not match with the pictures), you can delay the audio output to match the video. Press and hold AUDIO SYNC until ‘AUDIO SYNC’ is displayed. Within fi... -
Page 27: Play Music
Play DivX® video DivX video is a digital media format that retains high quality despite a high rate of compression. You can enjoy DivX video on this DivX® Certifi ed product. Insert a disc or USB that contains the DivX videos. Press DISC or USB. -
Page 28: Play Photo
Note • For a disc recorded in multiple sessions, only the fi rst session is played. • This product does not support MP3PRO audio format. • If any special characters are present in the MP3 track name (ID3) or album name, it might not be displayed correctly on the screen because these characters are not supported. -
Page 29: Play From Usb Device
Play musical slideshow Play MP3/WMA music fi les and JPEG photo fi les simultaneously to create musical slideshow. The MP3/WMA and JPEG fi les must be stored on the same disc or USB device. Play MP3/WMA music. Navigate to the photo folder/album and press OK to start slideshow play. -
Page 30: Play From Ipod
4th/5th gen Note • Refer to the Philips website for the latest updates on supported iPod models. Prepare the docking station If your iPod cannot fi t into the docking station, adjust the ‘support’ as below. -
Page 31: Play From Radio
Button Action VOL +/-, Increases or decreases volume. SOUND Selects a predefi ned sound effect. AMBISOUND Selects stereo sound output or multi-channel surround output. Skips to the previous or next track. Searches fast-forward (right) or fast-backward (left). Press repeatedly to change the search speed. -
Page 32: Listen To Radio
Listen to radio Press RADIO. Use the remote control to control the radio. Button Action Selects a preset radio station. Tunes the radio frequency up or down. Press and hold this button to erase the current radio station from the preset list. •... -
Page 33: Adjust Sound
6 Adjust sound Control the volume Press VOL +/- to increase or decrease the volume. • To mute, press • To restore the volume, press or press VOL +. Adjust bass/treble Press TREBLE or BASS. Within 5 seconds, press to set the high (TREBLE) or low (BASS) tone level. -
Page 34: Adjust Settings
7 Adjust settings You can customise various kinds of settings as you prefer. Refer to the following instructions to navigate through the setup menus. Symbol Options [General Setup] [Audio Setup] [Video Setup] [Preferences] Note • If the setup option is greyed out, it means the setting cannot be changed in the current state. - Page 35 You must turn on the HDMI CEC operations on the TV/devices before you can enjoy the EasyLink controls. See the TV/devices manual for details. • Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices. [Disc Lock] Sets play restriction for a specifi c disc.
-
Page 36: Audio Setup
Audio setup Ambisound Setup HDMI Audio Night Mode Press SETUP. » [General Setup] menu is displayed. Press to select [Audio Setup], then press . Select an option, then press OK. Select a setting, then press OK. • To return to the previous menu, press BACK. -
Page 37: Video Setup
Video setup TV System TV Display Picture Setting HDMI Setup Closed Caption Progressive Component Video Press SETUP. » [General Setup] menu is displayed. Press to select [Video Setup], then press . Select an option, then press OK Select a setting, then press OK. •... - Page 38 Note • This setting is only available if you have set the [TV Display] setting to [16:9 Wide Screen]. • [HDMI Video] – Selects the HDMI video output resolution that is compatible with your TV display capability. Option Description [Auto] Detects and selects the best supported video resolution automatically.
-
Page 39: Preferences
Preferences Note • Stop disc play before you can access [Preferences]. Audio Subtitle Disc Menu Parental MP3/JPEG Display Password DivX Subtitle Press SETUP. » [General Setup] menu is displayed. Press to select [Preferences], then press . Select an option, then press OK. Select a setting, then press OK. - Page 40 • This information is required when you want to fi nd out if a newer software version is available at the Philips website that you may download and install on this Home Theatre System. [Default] Resets all the settings of this Home Theatre System to factory default, except for [Disc Lock], [Password] and [Parental] settings.
-
Page 41: Additional Information
OK. Write down the version number, then press SETUP to exit the menu. Go to www.philips.com/support to check the latest software version available for this Home Theatre System. If the latest software version is higher than the software version of this Home Theatre System, download it and store it on a CD-R or USB fl... -
Page 42: Specifi Cations
9 Specifications Note • Specifi cation and design are subject to change without notice Playback media • DVD-Video, DVD+R/+RW, DVD-R/- RW, DVD+R DL, CD-R/CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3- CD, WMA-CD, DivX-CD, USB fl ash drive Amplifi er •... - Page 43 Power (Subwoofer) • Power supply: 220-240 V; ~50 Hz • Power consumption: 150 W • Standby power consumption: • Normal: <3 W • Low Power: < 0.3 W • System: Bass Refl ex System • Impedance: 4 ohm • Speaker drivers: 165 mm (6.5”) woofer •...
-
Page 44: Troubleshooting
If you still have a problem, register your product and get support at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back or bottom of your product. - Page 45 Play DivX video fi les cannot be played. • Make sure that the DivX fi le is encoded according to the ‘Home Theatre Profi le’ with the DivX encoder. • Make sure that the DivX video fi le is complete. The aspect ratio of the screen is not aligned with the TV display setting.
-
Page 46: Glossary
11 Glossary Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-defi nition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. - Page 47 Playback Control. A system where you navigate through a Video CD/Super VCD with on-screen menus that are recorded onto the disc. You can enjoy interactive playback and search. Pulse Code Modulation. A digital audio encoding system. Progressive scan The progressive scan displays twice as many frames per second as an ordinary TV system.