Related Manuals for Philips HTS6120/37
Summary of Contents for Philips HTS6120/37
- Page 1 Register your product and get support at www.philips.com/welcome User manual Manual del usuario FR-CA Manuel d’utilisation HTS6120...
- Page 2 Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome to ensure: Returning the enclosed card guarantees...
-
Page 3: Table Of Contents
Insert the remote control batteries Find the correct viewing channel Start Ambisound setup Use PBS to conÀ gure and clone the settings Turn on Progressive Scan Use Philips EasyLink Select a play source 5 Play Play a disc Play video Play music... -
Page 4: Important
1 Important Important safety instruction • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. -
Page 5: Copyright Notice
Warning • ModiÀ cations not authorized by the manufacturer may void user authority to operate this device. • Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. • Risk of overheating! Never install the Home Theater System in a conÀ... -
Page 6: Trademark Notice
About Progressive Scan Consumers should note that not all high deÀ nition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525 or 625 progressive scan picture problems, it is recommended that the user switch the connection to the ‘standard deÀ... -
Page 7: Your Home Theater System
2 Your Home Theater System Congratulations on your purchase, and welcome to Philips! To fully beneÀ t from the support that Philips offers, register your product at www.philips.com/welcome. Feature highlights Philips EasyLink Your Home Theater System supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. -
Page 8: Product Overview
Product overview Main unit ( Standby-On ) • Turns on the Home Theater System or switches to standby mode. b SOURCE • Selects a media to play or listen to audio from the connected device. c VOL +/- • Increases or decreases volume. STOP •... - Page 9 SETUP • Accesses or exits the setup menu. ( Navigation buttons ) • Navigates through the menus. • Press left and right for fast backward or forward search. • In radio mode, press up and down to tune the radio frequency. •...
-
Page 10: Connect
Different types of connectors may be used to connect this product to your TV, depending on availability and your needs. A comprehensive interactive guide to help you connect your product is available at www.connectivityguide. philips.com. Place the Home Theater System • Place the Home Theater System where it cannot be pushed, pulled over or knocked down. -
Page 11: Connect Video Cables
Home Theater System too close to any radiation devices. • You may purchase a separate table top stand that can support both your Philips Plasma/LCD TV and this Home Theater System from the nearest Philips retailers. Connect video cables Connect this Home Theater System to TV to view disc play. - Page 12 Note • If your device supports HDMI CEC, you can control compliant devices with a single remote control. (see ‘Get started’ > ‘Use Philips EasyLink’). • If the TV has a DVI connection only, connect via a HDMI/DVI adaptor. Connect an audio cable for sound output.
- Page 13 TV, disconnect it from your TV and connect it to the ANTENNA IN or RF IN jack on the RF modulator. • See your electronics retailer or contact Philips for details about RF modulator availability and operations.
-
Page 14: Connect Subwoofer
Connect subwoofer Unwind the subwoofer’s interconnect cable at TO MAIN UNIT . Connect the white end of the interconnect cable to the LOUDSPEAKERS jack on this Home Theater System. Connect the gray end of the interconnect cable to the TO SUBWOOFER jack on this Home Theater System. -
Page 15: Connect Audio Cables/Other Devices
Connect audio cables/other devices Route the audio from other devices to this Home Theater System to enjoy audio play with multi-channel surround capabilities. Connect audio from TV (also used for EasyLink control) Connect the audio cables (not supplied) to the AUDIO IN-AUX1 jacks on the Home Theater System and the AUDIO output jacks on the TV. - Page 16 Connect to coaxial jack Connect a coaxial cable (not supplied) to the COAXIAL DIGITAL-IN jack on the subwoofer and the COAXIAL/DIGITAL output jack on the device. Note • To listen to the audio output from this connection, press AUDIO SOURCE repeatedly until ‘COAXIAL INPUT’...
-
Page 17: Connect Power Cord
Connect USB device Connect the USB device to on this Home Theater System. Note • This Home Theater System can only play/view MP3, WMA, DivX (Ultra) or JPEG À les that are stored on such devices. • Press USB to access the content and play the À... - Page 18 Position the supplied bracket on the wall, drill the screw holes and insert the rubber wall plugs (not supplied) into the holes. • To mount this Home Theater System below the TV, leave at least 4 inches of space between the TV and the bracket.
-
Page 19: Get Started
4 Get started Insert the remote control batteries Slide the battery cover off the back of the remote control. Insert the 2 supplied batteries (AAA). Be sure the + and - ends of the batteries line up with the markings inside the case. Slide the cover back into position. -
Page 20: Find The Correct Viewing Channel
• Go to the lowest channel on your TV, then press the Channel Down button until you see the Philips screen. • Press SOURCE button repeatedly on the remote control of your TV. - Page 21 Please select the type of walls that surround your room: Hard (Concrete, wood) Soft (Curtains, open space) Back Change Select the condition of the room, then press . » [Room Placement] screen is displayed. Select the Sound Bar system placement position in your room: Middle of room Corner of room...
-
Page 22: Use Pbs To Conà Gure And Clone The Settings
Use PBS to conÀ gure and clone the settings PBS (Professional and Business Solution) contains a list of conÀ guration parameters of this Home Theater System. Once the settings have been conÀ gured, you can clone the PBS setup via a USB to the next Home Theater System in one single process. - Page 23 Option Description [Radio Enables or disables the functions Presets] of changing the radio presets on this Home Theater System. [Clone] Copies the PBS conÀ gurations (HTS6XXX.dat) to a USB device. A USB device must be inserted to this Home Theater System. The USB minimum storage capacity is 512KB.
-
Page 24: Turn On Progressive Scan
You can now turn on the progressive scan mode on the TV. Use Philips EasyLink Your Home Theater System supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control. - Page 25 One-touch standby When you connect your Home Theater System to devices that support standby, you can use your Home Theater System remote control to put your Home Theater System and all connected HDMI devices in standby mode. You can perform one-touch standby using the remote control from any of the connected HDMI devices.
-
Page 26: Select A Play Source
Select a play source On the main unit • Press SOURCE button repeatedly to select: DISC > RADIO FM > COAXIAL INPUT > OPTICAL INPUT > AUX 1 INPUT > AUX2 INPUT > AUX3 INPUT > MP3 LINK > USB > DISC ... On the remote control •... -
Page 27: Play
5 Play Play a disc Caution • Never place any objects other than discs into the disc compartment. • Never touch the disc optical lens inside the disc compartment. Press to open the disc compartment. Insert a disc with its label facing up. •... - Page 28 Change video play Play a title. Use the remote control to change the video play. Button Action AUDIO Selects an audio language or SYNC channel on a disc. SUBTITLE Selects the subtitle language on a disc. REPEAT Selects or turns off repeat or shufÁ...
-
Page 29: Sync Audio Output With Video Play
Sync audio output with video play If the video play is slower than the audio output (sound does not match with the pictures), you can delay the audio output to match the video. Press and hold AUDIO SYNC until ‘AUDIO SYNC’ is displayed. Within À... -
Page 30: Play Music
Play DivX® video DivX video is a digital media format that retains high quality despite a high rate of compression. You can enjoy DivX video on this DivX® CertiÀ ed Home Theater System. Insert a disc or USB that contains the DivX videos. -
Page 31: Play Photo
Note • For disc recorded in multiple sessions, only the À rst session is played. • This Home Theater System does not support MP3PRO audio format. • If any special characters are present in the MP3 track name (ID3) or album name, it might not be displayed correctly on the screen because these characters are not supported. -
Page 32: Play From Usb Device
Control photo play Play photo slideshow. Use the remote control to control the photo. Button Action Skips to the previous photo. Skips to the next photo. Rotates the photo clockwise. Rotates the photo anti- clockwise. ZOOM Zooms in or out of the picture. -
Page 33: Play From Portable Media Player
Play from portable media player Simply connect your portable media player (e.g. MP3 player) to this Home Theater System to enjoy superb sound quality from your music collections. Connect a 3.5mm stereo audio cable (not supplied) from the MP3 LINK jack on this Home Theater System to the ‘headphone’... -
Page 34: Listen To Radio
Listen to radio Press RADIO . Use the remote control to control the radio. Button Action Selects a preset radio station. Tunes the radio frequency up or down. Press and hold this button to erase the current radio station from the preset list. The preset number for other radio stations remain unchanged. -
Page 35: Adjust Sound
6 Adjust sound Control the volume Press +/- ( VOL +/- ) to increase or decrease the volume. • To mute, press • To restore the volume, press or press VOL + . Adjust Bass/Treble Press TREBLE or BASS . Within 5 seconds, press to set the high (TREBLE) or low (BASS) tone level. -
Page 36: Adjust Settings
7 Adjust settings You can customize various kinds of settings as you prefer. Refer to the following instructions to navigate through the setup menus. Symbol Options [General Setup] [Audio Setup] [Video Setup] [Preferences] Note • If the setup option is grayed out, it means the setting cannot be changed at the current state. - Page 37 You must turn on the HDMI CEC operations on the TV/devices before you can enjoy the EasyLink controls. See the TV/devices manual for details. • Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices. [Disc Lock] Sets play restriction for a speciÀ c discs.
- Page 38 [DivX(R) VOD Code] Displays the DivX® registration code. • Enter this Home Theater System DivX registration code when you rent or purchase video from www.divx.com/vod. The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered.
-
Page 39: Audio Setup
Audio setup Ambisound Setup HDMI Audio Night Mode Press SETUP . » [General Setup] menu is displayed. Press to select [Audio Setup] , then press . Select an option, then press OK . Select a setting, then press OK . •... -
Page 40: Video Setup
Video setup TV System TV Display Picture Setting HDMI Setup Closed Caption Progressive Press SETUP . » [General Setup] menu is displayed. Press to select [Video Setup] , then press . Select an option, then press OK Select a setting, then press OK . •... -
Page 41: Preferences
Note • This setting is only available if you have set the [TV Display] setting to [16:9 Wide Screen] . • [HDMI Video] – Selects the HDMI video output resolution that is compatible with your TV display capability. Option Description [Auto] Detects and selects the best supported video resolution... - Page 42 Note • If the language you have set is not available on the disc, the disc uses its own default language. • For some discs, the subtitle/audio language can only be changed from the disc menu. • To select the languages that are not listed in the menu, select [Others] .
- Page 43 Theater System. • This information is required when you want to À nd out if a newest software version is available at the Philips website that you may download and install on this Home Theater System. [Default] Resets all the settings of this Home Theater System to factory default, except for [Disc Lock] , [Password] and [Parental] settings.
-
Page 44: Additional Information
OK . Write down the version number, then press SETUP to exit the menu. Go to www.philips.com/support to check the latest software version available for this Home Theater System. If the latest software version is higher than the software version of this Home Theater System, download it and store onto a CD-R or USB Á... -
Page 45: Specià Cations
9 Specifications Note • SpeciÀ cation and design are subject to change without notice Playback media • DVD-Video, DVD+R/+RW, DVD-R/- RW, DVD+R DL, CD-R/CD-RW, Audio CD, Video CD/SVCD, Picture CD, MP3- CD, WMA-CD, DivX-CD, USB Á ash drive AmpliÀ er •... - Page 46 Output power: 6 mW (DVD), 7 mW (VCD/CD) • Beam divergence: 60 degrees. Declaration of conformity • Model number: HTS6120 • Trade Name: Philips • Responsible Party: Philips Consumer Lifestyle A Division of Philips Electronics North America Corp. P. O. Box 671539 Marietta, GA 30006-0026...
-
Page 47: Troubleshooting
If the problem remains unsolved, register your product and get support at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of your Home Theater System. The model number and serial number are on the back or bottom of your Home Theater System. - Page 48 Play DivX video À les cannot be played. • Ensure that the DivX À le is encoded according to the ‘Home Theater ProÀ le’ with the DivX encoder. • Ensure that the DivX video À le is complete. The aspect ratio of the screen is not aligned with the TV display setting.
-
Page 49: Glossary
11 Glossary Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-deÀ nition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. - Page 50 Playback Control. A system where you navigate through a Video CD/Super VCD with on-screen menus that are recorded onto the disc. You can enjoy interactive playback and search. Pulse Code Modulation. A digital audio encoding system. Progressive scan The progressive scan displays twice the number of frames per second than in an ordinary TV system.
-
Page 51: Limited Warranty
Philips is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or any non-Philips product or part not covered by this warranty. - Page 52 © 2008 Koninklijke Philips Electronics N.V. All rights reserved. Document order number: 000000000000...