Philips HTS6120/37 User Manual page 13

Option 3: Connect to the Video
(CVBS) jack
1
Connect a composite video cable to the
VIDEO OUT jack on this Home Theater
System and the VIDEO input jack on the
TV.
Note
•
The video input jack on the TV might be
labeled as A/V IN, VIDEO IN, COMPOSITE or
BASEBAND.
•
This type of connection provides standard
picture quality.
Option 4: Connect to the RF
modulator
If your TV only has a single Antenna Input
jack (labeled as 75 ohm or RF In), use a RF
modulator to view the disc play on the TV.
1
Connect a composite video cable
(yellow) from the VIDEO jack on this
Home Theater System to the video input
jack on RF modulator.
2
Connect a RF coaxial cable (not supplied)
from the ANTENNA OUT or TO
TV jack on the RF modulator to the
ANTENNA IN jack on your TV.
3
If the off-air antenna or Cable TV service
signal is connected to your TV, disconnect
it from your TV and connect it to the
ANTENNA IN or RF IN jack on the RF
modulator.
Tip
•
See your electronics retailer or contact Philips
for details about RF modulator availability and
operations.
EN 13