Ti10, Ti25, TiR and TiR1 Users
•
•
Do not incinerate the Imager and/or battery.
Go to Fluke's website for recycling
information.
Under General Specifications, Temperature add:
Charging..................0 °C to 40 °C (32 °F to 122 °F)
12/07
Charge the Imager for a minimum of 2 hours at least
every six months to maximize battery life. Without use,
the battery will self-discharge in approximately six
month. Batteries stored for long periods may require
two to ten charging cycles before the battery reaches
full capacity.
Always operate the Imager within the temperature
range specified in the specifications labeled
Temperature – Operating.
~W Caution
3
Manual Supplement