Table of Contents
Advertisement
If the automatic pairing fails or the subwoofer is switched OFF, the red indicator will rapidly
blink. Ensure that all the cables are well connected, the main unit and the subwoofer
is switched to On mode. If it still doesn't work, pair the subwoofer with the soundbar
manually.
1. Unplug both units from the mains sockets, then plug them in again after 3 minutes.
2. Press and hold the PAIR button on the rear of the subwoofer, and then press and hold
VOL+ and SOURCE on the unit for a few seconds to start pairing. The pair indicator on
the subwoofer will blink when pairing and will become solid when successful.
3. While the unit is pairing with the subwoofer, the red indicator will blink.
4. After the subwoofer is paired with the unit, the red indicator will become solid for 10
17
Hide quick links:
Advertisement
Table of Contents
