Statically Assign An Ip Address - D-Link DWR-921 User Manual

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1:
Windows 10 - Click Start -> Type Control Panel -> Network and Sharing Center -> Left Panel look for Change Adaptor Settings.
Windows 7 - Click Start -> Type Control Panel -> Network and Sharing Center -> Left Panel look for Change Adaptor Settings.
Windows Vista - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.
Windows XP - Click on Start > Control Panel > Network Connections.
Step 2
Right-click on the Local Area Connection or Ethernet which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) or Internet Protocol Version 4 (TCP/IPv4) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure
that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server
from your ISP.
Step 5
Click OK twice to save your settings.
D-Link DWR-921 User Manual

Statically Assign an IP address

2