D-Link DWR-921 User Manual page 46

• MAC – Specify device MAC for which QoS rule should
be enabled.
• IPv6 – Specify IPv6 address.
• PHYPORT – Specify Ethernet port number between 0-4.
• DSCP – Specify DSCP rule number between 0-63.
Protocol: Choose between three options for the rule:
• Both – TCP/UDP
• TCP
• UDP
Mode: Choose between two options for the rule:
• Guaranteed Minimum Bandwidth
• Restricted Maximum Bandwidth
Uplink Bandwidth: Enter the Upload speed limit in Kbps.
Downlink Enter the Download speed limit in Kbps.
Bandwidth:
Remark DSCP: Enter the DSCP remark rule number 0-63.
2
D-Link DWR-921 User Manual