Ringer ID
You can select the desired ringer tone to a group
that each phonebook entry is assigned (page 98).
When a call is received from a caller assigned to a
group, the ringer tone you selected for that group
rings instead of the called line's ringer tone (page
62, 112, 117) after caller information is displayed. If
you select "Current ringer" (default), the unit uses
the called line's ringer tone when calls from this
group are received.
1.
2.
: "
3.
: Select the desired group. then [SELECT]
4.
: Select the desired ringer tone. then
[SAVE]
5. [OFF]
then [MENU]
Group
" then [SELECT]
140