3. Handset:
Wait until a long beep sounds.
It may take more than 10 seconds to complete
•
registration.
When the CELL 1 or CELL 2 indicator lights
•
green, the cellular phone is connected to the
base unit. You are ready to make cellular calls.
4. To select which unit receives calls for the cellular
line, press [OK] then continue from step 3,
"Selecting which unit receives cellular calls",
page 59.
If not required, go to step 5.
•
5. [OFF]
Note:
• Make sure that your cellular phone is set to
connect to this product automatically. Refer to
your cellular phone's operating instructions.
• Make sure you cancel your cellular phone's current
registration if you want to register it to the other
line (page 69).
58