Table of Contents
Advertisement
TG80xxC(e).book Page 30 Friday, June 10, 2011 2:06 PM
Call Display Service
Using Call Display service
Important:
L This unit is Call Display compatible. To use
Call Display features, you must subscribe to
a Call Display service. Contact your service
provider/telephone company for details.
Call Display features
When an outside call is being received, the
caller's name and phone number are
displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
L If the unit cannot receive caller information,
the following is displayed:
– "Unavailable Name & No.": The
caller dials from an area which does not
provide a Call Display service.
– "Private caller": The caller
requests not to send caller information.
– "Long distance": The caller makes a
long distance call.
L If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
Missed calls
If a call is not answered, the unit treats it as a
missed call. The display shows "Missed
call". This lets you know if you should view
the caller list to see who called while you were
away.
Note:
L Even when there are unviewed missed
calls,"Missed call" disappears from the
standby display if the following operation is
performed by one of the registered
handsets:
– Being replaced on the base unit or
charger.
– Pressing {OFF}.
Phonebook name display
When caller information is received and it
matches a phone number stored in the
30
phonebook, the stored name in the phonebook
is displayed and logged in the caller list.
Ringer ID
This feature can help you identify who is
calling by using different ringer tones for
different groups of callers. When adding an
entry to the phonebook, you can assign it to
the desired group (page 20). When a call is
received from a caller assigned to a group, the
ringer you selected for that group rings after
caller information is displayed. If you select
"Current ringer" (default), the unit uses
the ringer tone you selected on page 24 when
calls from this group are received.
1
{C} (left soft key) s {MENU}
2
{r}: "Group" s {OK}
3
{r}: Select the desired group. s {OK}
4
{r}: Select the current setting of the
ringer ID. s {OK}
5
{r}: Select the desired ringer tone. s
{OK}
6
{OFF}
Caller list
Important:
L Only 1 person can access the caller list at a
time.
L Make sure the unit's date and time setting is
correct (page 14).
Viewing the caller list and calling
back
1
{3} CID
2
Press {V} to search from the most recent
call, or {^} to search from the oldest call.
3
To call back, press {C}.
To exit, press {OFF}.
Note:
L If the entry has already been viewed or
answered, "Q" is displayed, even if it was
viewed or answered using another handset.
Advertisement
Table of Contents
