Ringer Id And Light-Up Id - Panasonic KX-TG5562C Operating Instructions Manual

TG5562C_5566C(e).book Page 35 Friday, May 27, 2005 10:14 AM
announcement is heard at the ringer
volume (page 28, 53).
L When you receive a call while on the
phone, the 2nd caller's name will not be
announced even if you subscribe to both
Call Display and Visual Call Waiting
services.
L If this feature is turned off, caller names
will not be announced (page 59, 62).
L If an outside call is received while on an
intercom call between the handset and
base unit, the other handsets will ring,
but the caller's name will not be
announced.

Ringer ID and light-up ID

This feature can help you identify who is
calling by using different ringers and ringer
indicator colours for different callers stored
in the phonebook. You can assign a
different ringer and indicator colour to each
phonebook item. When a call is received
from a caller stored in the phonebook, the
ringer and indicator colour are used after
caller information is displayed.
L Usually the ringer and indicator colour
will be changed from the 2nd ring.
Ringer ID
You can assign a different ringer tone to
each caller in the phonebook. If you select
"No Ringer ID" (default), the unit will use
the ringer tone you set on page 53 when a
call is received from that caller.
1
Press {C} (right soft key).
2
Push the joystick up or down repeatedly
to display the desired item.
3
Press {OPTION}.
4
Press {1} to select "Ringer ID".
5
To select a tone or melody, scroll to
"Tone & Melody", then press
{SELECT}.
OR
Call Display Service
To select a song, scroll to
"Customized ring", then press
{SELECT}.
6
Push the joystick up or down repeatedly
to select the desired item.
7
Press {SAVE}, then press {OFF}.
Note:
L To erase a song, see page 55 and page
57. If you erase a song assigned to a
caller, the Ringer ID assignment will be
cancelled, and the handset ringer tone
(page 53) will be used instead of that
song.
Light-up ID
You can assign a different ringer indicator
colour to each caller in the phonebook.
Select "Color1" (amber), "Color2"
(blue), "Color3" (green), or
"Multicolor".
If you select "No Light-upID" (default),
the unit will use the ringer colour you set on
page 55 when a call is received from that
caller.
1
Press {C} (right soft key).
2
Push the joystick up or down repeatedly
to display the desired item.
3
Press {OPTION}.
4
Press {2} to select "Light-up ID".
5
Push the joystick up or down repeatedly
to select the desired ringer indicator
colour.
6
Press {SAVE}, then press {OFF}.
35