Teach-In Process (Vehicles With Telligent ® Automatic Gearshift System); Teach-In Process For Telligent ® Automatic Gearshift System - Mercedes-Benz Atego Manual

Teach-in process
i
The teach-in process cannot be performed in vehicles with automatic transmission.
®
In vehicles with Telligent
to program vehicle-specific data in the electronic system of the transmission control (GS), e.g. if the clutch has
been replaced or a fault has occurred.
If a fault is displayed:
Stop the vehicle.
Apply parking brake.
Switch off engine.
Perform minor or major teach-in process.
Notes on the teach-in process
The display of the engaged gear remains off for the entire duration of the teach-in process.
If a teach-in process is aborted, an event message is shown in the display.
Turn the vehicle key in the steering lock all the way back and wait at least 5 seconds.
The displays in the gear indicator disappear.
Repeat teach-in process.
i
Teach-in or operating errors are indicated by a fault code in the display, see page 77.
Minor teach-in process
The minor teach-in process is necessary when sensors on the transmission or on the clutch, or the clutch itself,
have been replaced.
Press and hold down neutral button.
Turn vehicle key in steering lock to drive position.
The gear indicator displays the transmission neutral position
Release neutral button.
The teach-in process is complete.
i
If the fault display reappears in the electronic system of the transmission control (GS) after the minor teach-
in process, perform the major teach-in process.
automatic gearshift system, the minor or major teach-in process is necessary in order
Guidelines for Breakdown Services (Subject to technical modifications)
Transmission
N .
75
i