Sensor Evaluation Kit, SEK002
2.2 Choose the sensor to be evaluated. Click on the links to the specific series in Table 2 to access the product datasheets.
Table 2. SEK002 Compatible Sensors
Basic Board Mount Pressure Sensors
ABP Series—High Accuracy, Compensated/Amplified
Digital output versions only
DIP, SMT, leadless SMT packages: SPI, I
DIP
Note: Refer to the product datasheet for soldering information.
Honeywell HumidIcon Digital Humidity/Temperature Sensors
HIH6100 Series, HIH6000 Series, HIH7000 Series,
HIH8000 Series, HIH9000 Series
SOIC-8 packages: SPI, I
SIP packages: I
SOIC-8
SIP
Note: Refer to the product datasheet for soldering information.
2 Sensing and Internet of Things
C output
2
SMT
Leadless SMT
C output
2
C output
2
MicroPressure Board Mount Pressure Sensors
MPR Series—Compact High Accuracy,
Compensated/Amplified
Leadless SMT packages: SPI, I
Leadless SMT
mounted on
breakout board
Note: See Appendix E for dimensions and more information on
the breakout board. Refer to the MPR Series product datasheet
for unmounted product soldering information.
Particle Sensors
HPM Series
UART output
Note: A specialized cable (32332297-001), shown below and
available separately from Honeywell, is required for use with the
HPM Series. Do not use cables from other manufacturers. See
Appendix F for more information.
Issue A
32333651
C
2
Leadless SMT
unmounted