Connecting To E1 Primary Rate Isdn - Vidicode Fax Server ISDN Series Manual

2.3 Connect 2.3 Connecting ing to to to to E1
2.3 2.3 Connect Connect ing ing
This only applies to the model for ISDN primary rate.
The Fax Server PRI is connected in series with the PBX. With the Fax
Server PRI you have received a cable with two RJ45 connectors. This
cable is used to connect the Fax Server PRI to the wall socket. The
existing cable can be used to connect the Fax Server PRI to the PBX as is
shown in the figure below.
It is possible that you do not want to connect the PBX together with the
Fax Server on one line because you want to use the line for faxing only.
In this case the PBX and the connection to it are not there.
It is also possible that you want to use all 30 channels of the E1 line for
faxing. In this case a second Fax Server PRI can be connected in place of
the PBX.
20 Fax Server ISDN manual © 2006-2014 Vidicode®
E1 p p p p rimary rimary r r r r ate ISDN ate ISDN
E1 E1 rimary rimary ate ISDN ate ISDN