Dial Prefix; Stand Alone Mode - Vidicode Fax Server ISDN Series Manual

4.3

4.3 Dial prefix

4.3 4.3 Dial prefix Dial prefix Dial prefix
The dial prefix is a standard number sequence that must be dialed
before an external number can be reached. When a Fax Server is
connected to an internal extension of a digital PBX a common prefix
would be "0".
It can also be used to route faxes to the most economical network
provider, that sometimes is not the same provider as for telephony
because fax transmissions tend to be shorter then telephone calls.
Dial Prefix: Dial Prefix: Off Dial Prefix: Dial Prefix:
NEXT NEXT
NEXT NEXT
Set the dial prefix.
• Press CHANGE CHANGE CHANGE CHANGE to enter the Prefix.
Dial Prefix: Dial Prefix: ▓ Dial Prefix: Dial Prefix:
STORE STORE STORE STORE
Enter the dial prefix.
Press STORE STORE to save the dial prefix.
STORE STORE
•
• Press NEXT NEXT to move on to the next menu item.
NEXT NEXT
4.4 Stand A 4.4

Stand Alone Mode

lone Mode
4.4 4.4 Stand A Stand A lone Mode lone Mode
Usually the Fax Server is connected to the line in series with a PBX (P P P P ass
T T T T hrough hrough M M M M ode hrough hrough ode ode). If this is not the case (Fax Server is the only device on ode
the line) the Stand Alone Stand Alone Stand Alone Mode Stand Alone
Stand Alone Mode: Off Stand Alone Mode: Off Stand Alone Mode: Off Stand Alone Mode: Off
NEXT NEXT NEXT NEXT
Set the Stand Alone Mode.
• Press CHANGE CHANGE to enable Stand Alone Mode.
CHANGE CHANGE
Please Please Note Please Please Note Note: If the Fax Server is in series with a PBX Stand Alone Note
Mode must must be turned Off
must must
32 Fax Server ISDN manual © 2006-2014 Vidicode®
Off Off Off
CHANGE STOP CHANGE STOP
CHANGE CHANGE STOP STOP
CANCEL CANCEL CANCEL CANCEL
Mode setting has to be turned On Mode Mode
CHANGE STOP CHANGE CHANGE CHANGE STOP STOP STOP
Off.
Off Off
ass ass ass
On. On On